Frame and plywood. building a hull with frames and plywood generally goes like this: the first thing is to build the frames, bulkheads, transom and stem-piece as shown on the plans and mark them by frame number. typically the frames are of 4 to 8 mm plywood with framing of clear pine or cedar.. I am beginning research on a sailboat i would like to design snd build; 40 foot by 8 foot. i see frame designs with stringers and gussets. sometimes the stringers are let into the frames flush and the frames flush with the ply.. Redwing 18 hull frame the picture above shows a plywood and fiberglass frame along the side and a stringer along the bottom strong no bevelling no expensive wood.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.